Skip to content
coinchoose
Menu

Coins guide

How to Bridge ETH to a Layer 2 Safely (Arbitrum, Base, Optimism)

Move ETH from Ethereum to Arbitrum, Base or Optimism: official bridges vs exchange withdrawals, the week-long wait, fees and avoiding bridge hacks.

On this page
  1. How do you bridge ETH from Ethereum to Arbitrum?
  2. How do you bridge ETH to Base or Optimism?
  3. Which route is cheapest: the official bridge, an exchange, or a third-party bridge?
  4. Why do layer 2 withdrawals take about a week?
  5. Have crypto bridges been hacked?
  6. What are the common mistakes when bridging, and how do you avoid them?
  7. FAQ
  8. Source register

You can move ETH from Ethereum mainnet to Arbitrum, Base or Optimism in roughly 15 to 30 minutes using each network’s official bridge, and you only need a self-custody wallet such as MetaMask holding ETH to cover gas. The cheapest route for many people is an exchange withdrawal sent straight to the layer 2 address, which skips the Ethereum transaction entirely. Before you start, note that moving funds back to Ethereum takes about a week on most optimistic rollups.

How do you bridge ETH from Ethereum to Arbitrum?

Open the official Arbitrum bridge at bridge.arbitrum.io, connect a wallet such as MetaMask, choose Ethereum as the source and Arbitrum One as the destination, enter the ETH amount and confirm. Deposits arrive in roughly 15 to 30 minutes, and you pay only Ethereum gas, not a percentage fee. Withdrawing back to Ethereum takes at least seven days, then a final Claim step.

These are the exact steps, drawn from Arbitrum’s own quickstart guide:

  1. Set up and fund a self-custody wallet. MetaMask and OKX Wallet both work, and any Web3 wallet is fine.
  2. Add Arbitrum One to the wallet: Chain ID 42161, RPC https://arb1.arbitrum.io/rpc, currency symbol ETH, block explorer arbiscan.io.
  3. Open the official bridge at bridge.arbitrum.io and connect the wallet.
  4. Set Ethereum as the source chain and Arbitrum One as the destination, select ETH and enter the amount.
  5. Click Move funds and confirm in the wallet. Keep enough ETH in the wallet to cover the transaction cost, or the prompt may not appear.
  6. Wait roughly 15 to 30 minutes, then check the balance on Arbitrum or look up the address on Arbiscan.

To return to Ethereum, reverse the direction, confirm the withdrawal, and wait for a countdown of roughly 7 to 8 days. Arbitrum’s docs describe the minimum as “at least seven days” before funds reach mainnet, after which you press Claim. The same official interface also reaches Arbitrum Nova, Arbitrum’s other chain.

How do you bridge ETH to Base or Optimism?

Base and OP Mainnet both use the OP Stack standard bridge. Base’s docs now point to Superbridge and Brid.gg, with the old bridge.base.org deprecated, while Optimism’s docs list the Superchain Bridges UI at app.optimism.io/bridge. In each case you connect a wallet, choose Ethereum as the source and the layer 2 as the destination, confirm, and pay Ethereum gas with no percentage fee.

Base is an Ethereum layer 2 built by Coinbase, which is why Coinbase users can withdraw straight to it. OP Mainnet is the home chain of the OP Stack. The mechanics are the same as Arbitrum: you deposit from Ethereum and the funds appear on the layer 2 in minutes, but the return journey is deliberately slow because of the rollup’s challenge period, which we cover below. For more on the underlying network, see our Ethereum explainer and the coin directory. Solana, by contrast, is a separate layer 1 rather than an Ethereum rollup, as our Solana vs Ethereum comparison explains.

Which route is cheapest: the official bridge, an exchange, or a third-party bridge?

For most people, withdrawing ETH straight from an exchange to the layer 2 is cheapest because it skips the Ethereum mainnet transaction that official bridges require. Official bridges charge no percentage fee but cost one Ethereum transaction in gas. Third-party liquidity bridges add a fee, roughly 0.01% to 0.06% plus gas, in exchange for transfers that settle in minutes.

Worked example: on an illustrative $1,000 move, the official bridge costs only one Ethereum mainnet transaction in gas, with no percentage taken. A third-party bridge charging 0.05% would add about $0.50, and one charging 0.06% about $0.60, plus gas on both ends, according to CoinMarketCap’s fee comparison of Stargate and similar services. Gas itself varies with network congestion, so the saving from skipping Ethereum is the part you can count on.

Route Fee Speed to the layer 2 Time back to Ethereum Main risk
Official bridge (bridge.arbitrum.io, Superbridge/Brid.gg, app.optimism.io) Ethereum gas only, no percentage fee Roughly 15 to 30 minutes ~7 days (Arbitrum, OP Mainnet); 5 days (Base) Fake bridge sites; long return wait
Exchange withdrawal to the layer 2 (Coinbase supports Base, Optimism and Arbitrum) Exchange withdrawal fee, no Ethereum gas Minutes Not applicable, funds sit on the layer 2 Exchange custody; wrong-network mistakes
Third-party fast bridge (Across, Stargate, cBridge) Roughly 0.01% to 0.06% plus gas Minutes Minutes (paid from the bridge’s own liquidity) Extra smart-contract risk

Coinbase’s developer docs confirm it can send ETH to Base, Optimism and Arbitrum. If your exchange offers the network you want, withdrawing to your layer 2 address is usually the cheapest way in, and it sidesteps the challenge period entirely for deposits. The trade-off is custody: leaving funds on an exchange carries its own risk, covered in our guide on keeping crypto on an exchange.

Why do layer 2 withdrawals take about a week?

Optimistic rollups post transaction data to Ethereum and leave a challenge window so anyone can dispute an invalid batch before it becomes final. On OP Mainnet that fault challenge period is 7 days, and Arbitrum One withdrawals wait at least seven days. Base’s current docs describe a 5-day finalization window, or 1 day when both TEE and ZK proofs back the proposal. Third-party bridges bypass the wait using their own liquidity.

A standard withdrawal is not one click. On OP Mainnet it is three transactions: initiate on the layer 2, prove on Ethereum once the output root is posted, then finalize on Ethereum after the challenge period. The 7-day clock starts from the prove step, so skipping or delaying it lengthens your wait. Both the prove and finalize steps are Ethereum transactions, so keep ETH on mainnet to pay for them.

As of November 2026, Base is the exception among the three. Its docs give a 5-day finalization window for standard withdrawals to Ethereum, falling to 1 day when both TEE and ZK proofs back the proposal. Deposits from Ethereum to Base do not wait for this window at all.

Have crypto bridges been hacked?

Yes, and bridges have been crypto’s largest theft target. Chainalysis counted about $2 billion stolen across 13 cross-chain bridge hacks by August 2022, roughly 69% of all funds stolen that year. The biggest incidents were Ronin ($615 million, March 2022), Wormhole ($320 million, February 2022), Nomad (nearly $200 million, August 2022) and Harmony’s Horizon bridge ($100 million, June 2022).

CNBC reported the total as about $1.4 billion lost to bridge breaches in the first eight months of 2022. The attacks hit the bridges’ own smart contracts or validator keys, not the people using them, which is why the practical advice is to prefer each network’s official bridge, avoid bridges with little history, and verify every address and URL yourself.

What are the common mistakes when bridging, and how do you avoid them?

The most common mistakes are using a fake bridge website, sending funds to the wrong network, not keeping gas on both chains, and entering a seed phrase when a fake support agent asks. Bookmark the official bridge URL from the project’s own docs, test with a small amount first, keep a little ETH on the destination, and never share your seed phrase.

  • Phishing sites. Fake bridges appear in search ads. Open the bridge from the network’s official docs and check the domain: bridge.arbitrum.io for Arbitrum, superbridge.app and brid.gg for Base, app.optimism.io/bridge for OP Mainnet.
  • Wrong network. Sending to the wrong network can make funds hard to recover. Confirm the destination chain in the bridge and in your wallet before confirming.
  • No gas on the destination. Keep a little ETH on the layer 2 to pay for future transactions, and keep ETH on mainnet for the prove and finalize steps of a withdrawal.
  • Wrong token contract. Check the contract address, not the ticker. Base’s native USDC is 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913, and Base’s docs warn that USDbC is a different asset.
  • Sharing a seed phrase. No bridge or exchange will ever need your seed phrase. Anyone who asks is stealing from you. Read more on keeping a seed phrase safe in our storage guide.

Crypto assets are volatile and this is not financial advice. Bridging moves value between networks; it does not change your exposure to price movements.

FAQ

How can I bridge ETH to Arbitrum?

Open the official bridge at bridge.arbitrum.io, connect a wallet such as MetaMask, choose Ethereum as the source and Arbitrum One as the destination, enter the amount and confirm. Deposits land in roughly 15 to 30 minutes and cost only Ethereum gas. Getting ETH back to Ethereum takes at least seven days, then a Claim step.

Is Arbitrum built on Ethereum?

Yes. Arbitrum is a layer 2 that settles on Ethereum, and its docs describe Ethereum as the parent chain. You bridge ETH from Ethereum mainnet to Arbitrum One, and withdrawals return to Ethereum only after the roughly seven-day challenge period.

How do I bridge my ETH to Base?

Use Superbridge or Brid.gg, the standard bridge interfaces Base’s docs now recommend (bridge.base.org is deprecated). Connect a wallet, choose Ethereum as the source and Base as the destination, enter the ETH amount and confirm. You pay Ethereum gas, and withdrawals back to Ethereum wait for Base’s 5-day finalization window.

What are the best crypto bridging platforms?

For safety, use the official bridge for each network: bridge.arbitrum.io for Arbitrum and Superbridge for Base and OP Mainnet. Third-party bridges such as Across, Stargate and Celer cBridge are faster but add a fee and another set of smart contracts, so reserve them for when speed matters and keep amounts small.

How do I bridge from Solana to Arbitrum?

Solana is a separate layer 1, not an Ethereum rollup, so the native Arbitrum bridge cannot reach it. You need a cross-chain bridge such as a Wormhole-based route. Either bring the asset to Ethereum first and then use the official bridge, or use a service that supports both chains directly.

Source register

  1. 01Arbitrum Docs: Quickstart: Arbitrum bridgedocs.arbitrum.io
  2. 02Base Docs: Bridge to Basedocs.base.org
  3. 03Optimism Docs: Withdrawal flowdocs.optimism.io
  4. 04Optimism Docs: Using the Standard Bridgedocs.optimism.io
  5. 05CNBC: Hackers have stolen $1.4 billion this year using crypto bridgescnbc.com
  6. 06Chainalysis: Cross-Chain Bridge Hacks Emerge as Top Security Riskchainalysis.com
  7. 07Base: The blockchain for global financebase.org
  8. 08Coinbase Developer Docs: Onramp Layer 2 Networkscoinbase-prod.main.mintlify.me

Last updated Spotted an error? Send a correction

About the author

CoinChoose Editorial Team

How CoinChoose researches and checks pages